Texas Instruments TI-89 Benutzerhandbuch
Additional Graphing Topics
485
•
Suppose Graph 1 and Graph 2 are set for function graphing. Although both sides
show the same function list, you can select (Ÿ) different functions for graphing
show the same function list, you can select (Ÿ) different functions for graphing
Note:
If you make a change on the active Y= Editor (redefine a function, change a style,
etc.), that change is not reflected on the inactive side until you switch to it.
Using a Split Screen
Using a Split Screen
Using a Split Screen
Using a Split Screen
For more complete information about split screens, refer to Split Screens.
•
To switch from one graph side to the other, press
2 a (second function of
O).
•
To display different applications:
-
Switch to the applicable graph side and display the application as you normally
would.
would.
– or –
-
Use
3 to change
Split 1 App
and/or
Split 2 App
.
•
To exit two-graph mode:
•
When both sides use the same graphing
mode, each side shows the same function
list.
mode, each side shows the same function
list.
-
You can use
† to select different
functions and stat plots (indicated
by Ÿ) for each side.
by Ÿ) for each side.
-
If you set a display style for a
function, that style is used by both
sides.
function, that style is used by both
sides.
2 ˆ