KYOCERA 205c.255c Benutzerhandbuch

10-10

Troubleshooting > Solving Malfunctions

Documents are printed 
improperly.

Are the application software settings at 
the PC set properly?

Check that the printer driver and 
application software settings are set 
properly.

—

Cannot print with USB 
memory. 
USB memory not recognized.

Is the USB host blocked?

Select [Unblock] in the USB host 
settings.

—

Check that the USB memory is 
securely plugged into the machine.

—

When displaying an image 
sent from the machine on the 
PC, an image size is shrunk 
vertically or horizontally.

Have you selected 200×100dpi Normal 
or 200×400dpi Super for the scan 
resolution?

Select a scan resolution other than 
200×100dpi Normal or 200×400dpi 
Super when sending an image.

Printouts have lines.

Is the slit glass dirty?

Clean the slit glass.

—

Run [Laser Scanner Cleaning].

Dirt on the top edge or back 
of the paper.

Check interior of the transfer unit.

Open the right cover and check for 
toner on the paper transfer unit. Clean 
interior of the unit using a soft, dry, lint-
free cloth.

—

Part of the image is 
periodically faint or shows 
white lines.

Have the developer unit and drum unit 
been loaded properly?

Load the developer unit and drum unit 
properly.

—

—

Open and then close the right cover.

—

—

Run [Drum Refresh].

—

If you experience frequent problems, 
turn the cassette heater switch on. 

Print on the back of the sheet 
is visible on the front.

—

Set Prevent Bleed-through to [On].

Skewed-color printout.

—

Run [Calibration].

—

Run [Color Registration].