HP (Hewlett-Packard) HP2065 Benutzerhandbuch
Mechanical
Dimensions
(H x W x D)
(H x W x D)
Packaged
7.8 x 6.25 x 1.5 in (19.8 x 15.9 x 3.8 cm)
Unpackaged
6.3 x 5.2 x 0.65 in (16 x 13.2 x 1.65 cm)
Weight
Packaged
1.1 lb (0.49 kg)
Unpackaged
0.82 lb (0.37 kg)
Additional components
Eight 10 mm mounting screws (for attachment to VESA compliant monitor mounts)
Eight 15.5 mm mounting screws (for attachment to HP Compaq t5000 Thin Client products)
Four 20 mm mounting screws (for attachment to back of select HP flat panel monitor
stands)
One Quick Release "locking" screw
Eight 15.5 mm mounting screws (for attachment to HP Compaq t5000 Thin Client products)
Four 20 mm mounting screws (for attachment to back of select HP flat panel monitor
stands)
One Quick Release "locking" screw
Color
Carbonite
Notes
No HP monitors allow positioning of a thin client product between a monitor screen and its
stand.
stand.
1.
The Quick Release device is not to be used between a monitor screen and its stand unless
provided that way from the factory.
provided that way from the factory.
2.
Under no circumstances is the Quick Release device intended to be used in an orientation
where the Release/Lock lever is oriented downward.
where the Release/Lock lever is oriented downward.
3.
Supported weight
capacity
capacity
The HP Flat Panel Monitor Quick Release has been designed to support a maximum of up to 24
lbs (10.9 kg) depending upon the mounting configuration used. Please note this is a total weight
limit for all devices mounted, i.e. the combined weight of the monitor and a second device such as
an HP Compaq t5000 Series Thin Client cannot exceed 24 pounds. Because mounting surfaces
vary widely and the final mounting method and configuration may vary, mounting fasteners are not
supplied (other than the VESA-compliant screws). HP recommends that you consult with a
qualified engineering, architectural or construction professional to determine the appropriate type
and quantity of mounting fasteners required for your application and to ensure that your mounting
solution is properly installed to support applied loads.
lbs (10.9 kg) depending upon the mounting configuration used. Please note this is a total weight
limit for all devices mounted, i.e. the combined weight of the monitor and a second device such as
an HP Compaq t5000 Series Thin Client cannot exceed 24 pounds. Because mounting surfaces
vary widely and the final mounting method and configuration may vary, mounting fasteners are not
supplied (other than the VESA-compliant screws). HP recommends that you consult with a
qualified engineering, architectural or construction professional to determine the appropriate type
and quantity of mounting fasteners required for your application and to ensure that your mounting
solution is properly installed to support applied loads.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the U.S. and other countries.
Windows Vista is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other
countries.
Windows Vista is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other
countries.
QuickSpecs
HP LP2065 Flat Panel Monitor
Technical Specifications - HP Flat Panel Monitor Quick Release
DA - 12377 Worldwide QuickSpecs — Version 6 — 5-23-2007
Page 9