Atlona AT-HDVS-RX Benutzerhandbuch
9
1. Save: Allows a display’s RS-232 settings to be saved to the PC for easy set up in the future
Load: A previously saved display’s settings from your PC
2. RS-232 port - Set to display’s port settings
Load: A previously saved display’s settings from your PC
2. RS-232 port - Set to display’s port settings
(See display’s manual for the recommended device settings)
3. Select between text (ASCII) and hex commands input for display on and off
4. Type commands for display on and display off in these fields
5. Send: Once the information is entered, press send to transmit command to RX to set up control
Read: Verifies commands are correctly stored on the HDVS-RX
6. Use these buttons to add a carriage return at the end of the command
4. Type commands for display on and display off in these fields
5. Send: Once the information is entered, press send to transmit command to RX to set up control
Read: Verifies commands are correctly stored on the HDVS-RX
6. Use these buttons to add a carriage return at the end of the command
Note: Carriage return will show a square and circle to confirm the carriage return
(see picture A)
Note: When switching back to text, any non-ASCII HEX will display as bullets
(see picture B)
1
2
3
5
6
4
A
B
1. Picture settings - Set the brightness, contrast, saturation, sharpness, and hue for the output
Note: Calibrate the display before using the HDVS-RX picture settings to adjust the output
2. Read - Press to populate the HDVS settings
3. Reset - Resets the picture to factory default settings
3. Reset - Resets the picture to factory default settings
1
2
3
atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515