Acu-Rite CNC 3500i Benutzerhandbuch

ACU-RITE 3500i

This allows the operator to adjust the current feed and speed.  There 
are two modes for this, each having it’s own dialogue. When the 
current active tool has values entered for the feed and speeds in the 
tool table the “Feed and Speed Calculator” dialogue will open.

This dialogue allows the operator to use the feed and speed values as 
is from the Feed and Speed tool table. The operator can also manually 
enter new values or adjust the feed depending on a new speed value 
entered.



Touch the Feed and Speed Location zone.



This example describes the Feed and Speed Calculator dialogue 
showing the current active tool having values entered for the feed 
and speed in the tool table.



First, select the type of operation that is to executed in the Type field 
drop down menu.



To adjust the values directly, check the Enter New Values check box 
and enter new values for Speed or Feed by touching the activated 
edit fields and entering new values.



To adjust the Feed by entering a new Speed value, check the Enter 
New Values check box. 



Touch the activated Speed edit field, and enter the new speed value.  



Touch the Update Feedrate button.



The new feedrate will be calculated using this new speed value as 
will as the other parameters shown (e.g. tool diamenter, chip load, 
and number of teeth).



Touch Use to activate the changes, or press Cancel to exit without 
changing the active feed and speed.



When the Use button is touched, the operator will be prompted to 
“Press Start to run operation or Manual to cancel”.



Press the Start button to execute the change, or:



Touch the Manual button to cancel all changes.