Motion Computing LE1600TC Benutzerhandbuch

38

Chapter 

2  Using Your Motion Tablet Client

5. After you have practiced, you will be asked to scan one more time for 

verification. After the verification is successful, tap Next to scan your 

finger again, this time for real (not practice).

6. Place the selected finger over the nickel-colored ring and slowly, with 

moderate pressure, drag your finger across the sensor from right-to-

left (one direction only, not back and forth) or left-to-right (one direc-

tion only, not back and forth). Make sure your entire fingerprint (i.e., 

your fingertip, not your whole finger) touches both the nickel-colored 

ring and the sensor surface. 
Successful fingerprint capture: If the capture is successful, 
you will see a green fingerprint image in the capture area. If 
the capture is unsuccessful, an information message 
appears, such as “Scan too slow/too fast...” and the green 
fingerprint will not appear. Swipe your finger across the 
sensor again as many times as required for a successful 
scan.