Samsung SLP-D220E Benutzerhandbuch

 

5-5 Gap Sensor Manual-Calibration 
 
Manual-calibration of media detection can be used when the printer cannot detect a media 
gap (or black mark) even after auto-calibration has been executed. 
 
Users can calibrate sensor parameters in detail by using the utility program provided by 
the manufacturer.   
 
The utility can be obtained from the enclosed CD or downloaded from the Internet via the 
BIXOLON website    www.bixolon.com 
 
 
Please make sure the printer is connected and execute the utility program. 
Please the Calibration Setting Manager Button after setting the interface type. 
 

     

 

 

1) Select the sensing type and input the label length by millimeter and click on “Check   

Sensing Value” tap. Then printer starts to calibrate.   

 
2) Printer will print the scanned values after calibration and the values will appear on the   

Screen.  

 
3) Optimal sensing values will appear in black bold letters on the left of the utility screen 

and select one of the values and click on “Save Calibration” 

 
4) If chosen value does not work properly, please try the other values among the black 

bold letters.   

 
5) To go back to the initial value, please click on “Cancel Calibration”