GE PMCS 6.15 Benutzerhandbuch

 

 

 

 

•  75 power management devices (IEDs) (100 max), 
•  150 I/O points (through IEDs or PLCs) 
•  64 ethernet serial communications ports, 
•  2 Modbus Monitors (maximum) using standard Modbus Monitor Proxy 

 

 

 

 

•  20,000 points/tags in HMI database (30K Max) 
•  600 HMI alarms configured max 
•  600 trended points (8 max per device) 
•  HMI I/O rates, alarm rates, and logging rates not to exceed 750 pts/sec 
•  13 HMI screens in CIMPLICITY utilizing Power Builder -10 device 

type and 50 user screens 

•  150 HMI screens in InTouch 
•  5 DDE ports in CIMPLICITY with no more than 10 devices 

configured per port 

•  10% of tags connected to enterprise solution 
•  Web-enabled only via CIMPLICITY WebView - no waveform or 

event viewers 

•  Maximum of one Viewer node 

•  No redundancy  
•  Components to be run as NT services by default 

 

                    

Response times:   

•  1 second or less to open an HMI screen 
•  1 seconds update time to populate a screen per device per serial 

•  4 to 7 second time delay to display event in PMCS Event Viewer 
•  1 second response time to make device change (settings/ command 

coil) not including device feedback 

•  1000 device events/ sec burst support 

 

                     

Configuration: 

•  Maximum 15 devices per serial port 
•  Device baud rates set to maximum  
•  CIMPLICITY HMI points set for on-demand 
•  Devices supporting 125 register block reads 
•  Average CPU utilization <35% 
•  99% system uptime 

•  Getting Started