GE PMCS 6.15 Benutzerhandbuch

 

Select the appropriate network adapter from the list and click Have Disk…. 
Follow the instructions provided on the screen to complete the network card 
installation. 

For PMCS systems using one or more GE Multilin RS232 to RS485 converters 
(or equivalent), no additional drivers are required. 

 

If you are using an Ethernet interface card to connect to the PMCS network 
through one or more Ethernet Gateways or directly to a network of Universal 
Relays, EPM 9650 / 9450s (Modbus TCP/IP), follow the manufacturer’s 
installation instructions and be sure to install the provided Windows NT drivers 
using Control Panel>Administrative Tools >Computer 
Management>System Information> Components>Network>Adapter. Refer 
to the screen shots above for an example, though the selections will differ based 
on the hardware you are installing.  

Ethernet requires the TCP/IP protocol for compatibility with the Ethernet 
Gateway. TCP/IP should have been installed with Windows 2000 SP4; you can 
check this using Control Panel>Administrative Tools >Computer 
Management>System Information> Components>Network>Protocol. The 
screen shot below shows a system with TCP/IP installed. If TCP/IP is not 
installed on your system, refer to the Windows 2000 SP4 documentation for 
installation instructions. 

•  21