OKI 56801 Benutzerhandbuch

17. Start Key: Pressing the 

 key initiates the operation 

indicated on the display or confirms information you have 
entered into the display. While the fax machine is in power 
save mode, press the 

 key to exit power save mode.

18. One-Touch Keypad: The One-Touch keys are an important 

tool on your fax machine. You will use them for quick, One-
Touch dialing, and to access the functions and programming 
options of your fax machine.  For a description of all the 
functions, including the special characters assigned, of the 
One-Touch keypad, see below.  Important key descriptions 
are listed below:
• Caps Key (One-Touch key 1): In character string input, 

when 

 is showing on the LCD display panel, pressing 

this key allows you to make a case shift.

• Space Key (One-Touch key 36): Use this key on the 

One-Touch Keypad to enter spaces while programming. 
Unlike the 

 key, spaces are used for easier reading 

only and have no effect on dialing.

• Delete Key (One-Touch key 16): In character string and 

numeric string input, by pressing this key, the character the 
cursor is sitting under is deleted and the right character string 
of the cursor is moved to the left.

• Pause Key (One-Touch key 17): Use this key on the 

One-Touch keypad to enter automatic 3-second pauses in 
dialing when programming telephone numbers. For exam-
ple, you may want to use this key to tell your machine to wait 
for an outside or international line to open. Pauses in tele-
phone numbers are marked by a “P” symbol.

• Plus Key (One-Touch key 18): Each fax number you 

enter or program into your fax machine can be up to 40 digits 
long. In the case that you need to dial a number which is 
longer than 40 digits, it is possible to dial a number using 
any combination of One-Touch keys, Auto Dial numbers or 
the numeric keypad. When programming a chain dial num-
ber into a One-Touch key or Auto Dial number, press the 

 key at the end of the first part of the number to indicate 

to the fax machine that this is a chain dial number.

19. One-Touch Labels: After programming a location into a 

One-Touch key, write the name of the location on the One-
Touch label. Lift off the plastic cover and use a pencil to 
write in the name, then replace the cover.

One-Touch Dialing
To use a One-Touch key for dialing, just press the appropriate 
One-Touch key. For each key, you may program up to two tele-
phone numbers: a primary number, which will always be dialed 
first, and an alternate number which will be automatically 
dialed if the first number is busy or if there is no answer.