Muratec IF-200 Benutzerhandbuch

OPTIONS AND DESCRIPTION (Default settings are in BOLD 
type) 

E-Mail Subject 

“Muratec Fax” The subject to be listed in the header of outgoing 
IP network or Internet faxes. 

Prompt for Subject 

 

Yes, No. Allows user to define subject of email. During the 
sending of a fax the user is prompted to enter the subject of the 
email. If no subject is entered the default subject is inserted. 

E-Mail Desc 1-4 

Four lines of text at the bottom of the header of outgoing IP 
network or Internet faxes: 

1: Internet Fax is attached from a Muratec IF-200. If needed,  
2: download a free TIFF viewer from www.muratec.com. Click 
on products link, then click on the link for the IF-200 product 
page, where you will find the viewer download file. 
3: If you have problems or questions contact 
webmaster@muratec.com. Please 
4: include your fax and telephone numbers so Muratec can 
respond. 

Lines Per Page 

63. The number of lines of an e-mail text you wish to be printed 
on each page. 

Max Text Pages 

5. Maximum number of pages of an e-mail text before it is 
classified as “other” e-mail type. 

Local Number 
Length 

0. If the number of digits in a local telephone number is specified, 
then the following occurs. When a fax is sent using the FAX 
SERVICE send method and the length of the telephone number is 
less than or equal to the length specified, the fax is sent as a direct 
fax rather than using the fax service. 

Print all Text 

Yes. Prints all text regardless of character set. 

Route Incoming 
Faxes to Email 
 

 

No. Reroutes all Direct Incoming faxes to a user specified e-mail 
address. 

Inbound Routing 
Address 

E-mail address to route Direct Incoming faxes to. 

Verbose 

Yes, No. If enabled, communicates debugging information via the 
IF-200’s SERIAL port at 38400 Baud, 8 data bits, 1 stop bit, no 
parity.