Brother 1030e Benutzerhandbuch

Press Menu/Set, 8, 3.

Press 

 or 

 to select TAD MESSAGE (or F/T MESSAGE or PAGING MSG.), and 

press Menu/Set when the screen displays your selection.

Press 

 or 

 to select ERASE MSG and press Menu/Set.

Press 1 to erase the OGM—OR—Press 2 to exit without erasing.

Press Stop/Exit.

Press and hold 

 until the button lights and the screen displays TAD:MSG MGR.

When 

The 

 light flashes when you have new messages and/or faxes waiting for your review.

The LCD screen displays the total number of voice 
(including recorded conversations) and/or fax messages 
stored in Message Manager memory.

If you press the flashing 

 to turn off the Message 

Manager before getting your new messages, they won’t be 
lost. The new messages will be played automatically and 
the LCD will ask you to acknowledge the new faxes:

Press 1 to print (and automatically delete) the faxes from memory—OR—Press 2 to save the faxes 
in memory until printing is convenient.

Print the Memory Status List and select the item to be cleared. This will clear space for new 
messages and faxes to be stored in memory. (See Printing Reports, page 34.)

If the memory becomes full when you have set your machine to Message Manager 
mode, the machine will change to F/T mode automatically. In this mode, the 
machine can accept incoming faxes automatically. Then, if your machine should 
run out of paper, the answer mode will shift automatically to manual mode. In 
manual mode the call is not answered, so your caller will know to try again later.

VOICE:03 DOC:02

PRINT DOC?

1.YES 2.NO