Canon C755 Benutzerhandbuch

6

Your MultiPASS comes with a Setup program that makes installing the MultiPASS software easy and fast.

You install the MultiPASS software from the Canon Creative for MultiPASS CD-ROM.

  The MultiPASS must be plugged in. If you have a previous version of the MultiPASS Desktop Manager 

installed, you must remove it. See your MultiPASS Desktop Manager Software Guide for details.

 2000/NT Users:  Administrator Privileges are required to install and remove the MultiPASS 

Desktop Manager software.
Stand-alone Fax Users: If you plan to use the MultiPASS as a stand-alone fax machine, see the Stand-alone 

Fax Manual for instructions on how to program your name and fax number. Then select your Receive mode 

based on how you set up your phone connection in Step      .

Click Cancel if you see a screen similar to these: 

"New Hardware Found", "Update Device Driver 

Wizard",  or "Add New Hardware Wizard". 
Make sure you return to the Windows desktop.

 

1. Make sure your computer is turned off.
2. Be sure the MultiPASS is plugged in and connected 

     to the computer.
3. Make sure the Canon Creative CD is NOT yet 

      inserted in your CD drive.
4. Now turn on the computer.
5. If any Windows applications start automatically, 

     close them before you start installation. This is very 

     important. Make sure NO programs are running, 

     including any virus protection programs.

1. Insert the Canon Creative CD into your CD drive. 

    (This CD contains all the device software for your 

    MultiPASS, including the MultiPASS Printer and 

    Fax drivers, MultiPASS ODBC, and ScanGear™ 

    for MultiPASS.) Setup starts automatically.

If Setup does not start automatically, from the 

taskbar, click Start and then Run. You see the 

Run screen.

If anything is displayed in the Open box, replace it 

by typing 

X:\SETUP 

(where 

X:

is your CD drive). 

Then click OK.

2. Follow the on-screen instructions to 

     finish installation. 
        Normally you click Next or Finish 

        to move from one screen to the next.
        Be sure to read each screen carefully. 

        When specifying your fax information, 

        you must enter a fax heading and 

        specify a Receive mode. Select your 

        Receive mode based on how you set 

        up your phone connection in Step      . 

When installation is complete, the Setup 

program determines whether or not your 

computer needs to be restarted. 

The next time you start your 

computer, you may see the 

"New Hardware  Found" screen. 

Wait a few seconds while the 

system updates itself; the screen 

will disappear.

The next time you start your system, 

double-click on the Canon Creative Launcher 

icon on your desktop. From here you can 

install the Canon Creative software, run the 

software programs after they are installed, 

register the MultiPASS, view the online 

manuals, and find out how to order supplies 

and get help from Canon.