Canon B160 Benutzerhandbuch

CHECK PRINTER 
(Continued) 

–

The BJ cartridge may be 
defective.

Press [Start]. Reinstall 
the BJ cartridge 
(see p. 1-8) and start 
again. 

In either case, if the 
error does not clear, try 
unplugging the fax. Wait 
several minutes, then 
plug it back in. Also, try 
replacing the BJ 
cartridge with a new 
one. 
(see p. 9-8)

–

The waste ink tank 
(which holds the ink 
expelled during print 
head cleaning) may be 
full. 

Contact your local 
authorised Canon dealer 
or the Canon Help Desk 
to have the waste ink 
tank replaced 
immediately.

CLEAR PAPER JAM 

–

There is a paper jam. 

Clear the paper jam (see 
p. 9-3) and reload paper 
in the multi-purpose tray. 
Press [Start].

COLOUR INK EMPTY 
(FAX-B180C only)

–

The Colour BJ tank in 
the Colour BJ cartridge 
is empty or its ink may 
have dried out.

Clean the BJ cartridge 
print head (see p. 9-8). 
If the message remains 
in the LCD, replace the 
Colour BJ tank. 
(see Printer Guide)

DATA ERROR

–

An error has occurred 
and all one-touch speed 
dialling, coded speed 
dialling, and user data 
has been lost.

Press [Set], then re-
register the data. 
(see Chapter 2)

DOC. TOO LONG

#003

The document is longer 
than 1 metre.

Use a copier to make a 
reduced copy of the 
document and then send 
the copy. 

ECM RX

–

The fax is receiving a 
document using Error 
Correction Mode (ECM).

ECM receptions may 
take longer than normal 
receptions. Turn off ECM 
if you need to receive 
quickly, or if you know 
your local lines are in 
good condition. (see 
ECM RX, p. 8-5)