Lanier 2002 Benutzerhandbuch
Set Printer (2002 Only)
PC Printing & Scanning
5 - 7
GDI Enhance
Allows users to select the GDI printer driver which supports 600 dpi. Additional
memory is necessary for printing documents at 600 dpi.
memory is necessary for printing documents at 600 dpi.
Note: If your unit generates a “MEMORY FULL” report while attempting to
print a document using PCL4 emulation, or the Window GDI Driver and does not
print your document, your unit requires additional memory.
print a document using PCL4 emulation, or the Window GDI Driver and does not
print your document, your unit requires additional memory.
Note: Since the fax unit must be turned OFF when switching to PCL4 emulation
or Windows GDI Driver, make sure that any documents stored in memory are
printed out first.
or Windows GDI Driver, make sure that any documents stored in memory are
printed out first.
1
Press the PROGRAM Key and scroll through the
menus until you reach the Set Printer menu and
press YES.
menus until you reach the Set Printer menu and
press YES.
2
Press 7 or scroll down to the PCL4 Enhance menu
and press YES.
and press YES.
3
Select either ON or OFF depending on your needs.
Press YES to accept this data into memory.
Press YES to accept this data into memory.
4
If you chose YES, you must restart your unit to
make this change active.
make this change active.
SET PRINTER?
YES / or 1-8
8 GDI ENHANCE?
OK=YES
ON *OFF
-SELECT&PUSH”YES”-
PCL4/GDI CHANGE
RESTART YOUR FAX