Lanier 2002 Benutzerhandbuch
Setting Up the (Optional) PFU
A - 14
Unpacking & Installation
Loading the Cassette
1
Remove the Cassette from the vinyl bag.
2
Remove the shipping tape and cardboard.
Note: To remove the Baseplate retaining cardboard, carefully slide them forward and
then remove.
then remove.
3
Press down the Baseplate until it
locks into position.
locks into position.
4
Place a sheet of paper on the
baseplate and check to see that the
Cassette is set for that paper size.
baseplate and check to see that the
Cassette is set for that paper size.
Note: Refer to the Specifications for
appropriate paper sizes.
appropriate paper sizes.
5
To change the Cassette Paper size,
remove the necessary screws and re-
position the guides for the new size.
remove the necessary screws and re-
position the guides for the new size.
Note: Do not overtighten the screws. They can strip out if care is not taken.
6
Fan the paper stack thoroughly and align its edges.
7
Load the paper into the Cassette.
Note: If you are using pre-printed
stock such as letterhead, place the
side to be printed face down.
stock such as letterhead, place the
side to be printed face down.