Lanier 2002 Benutzerhandbuch
Sending a Document
2 - 6
Basic Operations
Using Combination Dial
This is used when the number exceeds the 30 digit limit for a single location. The number
is split between two locations and the two are automatically linked when the first of the
two is used. It is possible to input dialing numbers continuously. You can enter another
One-Touch, Speed Dial or Ten Key followed by the combination dial numbers (phone
numbers last digits is ‘+’ in One Touch or Speed Dial Key). The telephone number limit is
30 digits.
is split between two locations and the two are automatically linked when the first of the
two is used. It is possible to input dialing numbers continuously. You can enter another
One-Touch, Speed Dial or Ten Key followed by the combination dial numbers (phone
numbers last digits is ‘+’ in One Touch or Speed Dial Key). The telephone number limit is
30 digits.
1
Place your document face down on the Document Feed Tray.
2
Adjust the Document Side Guides to the edges of the document.
3
Use the TYPE ORG. Key to select the desired contrast:
4
Use the RESOLUTION Key to select the desired resolution:
5
Press a One-Touch Key.
•
The One-Touch number should have a “+” at the end indicating an additional
Key has been programmed to extend the length of the number.
6
Press the second One-Touch key containing the additional numbers and press
START.
START.
•
The unit scans the document into memory and sends it to the location you
selected.
•
The unit automatically returns to standby mode when finished transmitting.
7
To stop a transmission, press the STOP Key.