Panasonic KX-FP145AL Benutzerhandbuch
4. Fax
29
4.4.3 Erasing a stored item from
the broadcast memory
the broadcast memory
1
Press {>}.
2
Press {A} or {B} repeatedly to display
“
“
<BROADCAST>”.
3
Press {MENU}.
4
Press {#}.
5
Press {A} or {B} repeatedly to display the
desired item you want to erase.
desired item you want to erase.
L
To cancel erasing, press {STOP}.
6
Press {SET}.
7
Press {SET}.
L
To erase other items, repeat steps 5 to 7.
8
Press {STOP}.
4.4.4 Sending the same
document to pre-programmed
parties
document to pre-programmed
parties
1
Insert the document FACE DOWN.
2
If necessary, press {A} or {B} repeatedly to
select the desired resolution (page 26).
select the desired resolution (page 26).
3
Press {BROADCAST}.
L
The document will be fed into the unit and
scanned into memory. The unit will then
transmit the data to each item, calling
each number sequentially.
scanned into memory. The unit will then
transmit the data to each item, calling
each number sequentially.
L
After transmission, the stored document
will be erased automatically, and the unit
will automatically print a broadcast
sending report.
will be erased automatically, and the unit
will automatically print a broadcast
sending report.
Note:
L
If you select “
FINE”, “SUPER FINE” or
“
PHOTO” resolution, the number of pages that
the unit can transmit will decrease.
L
If the document exceeds the memory
capacity, sending will be cancelled.
capacity, sending will be cancelled.
L
If a party is busy or does not answer, it will be
skipped and redialled later up to 2 times.
skipped and redialled later up to 2 times.
To send the same document to a one-time
group of parties
group of parties
You can also select a one-time group of parties
to send the same document to. After
transmission, this group will be deleted.
to send the same document to. After
transmission, this group will be deleted.
1. Insert the document.
2. Press {>}.
3. Press {A} or {B} repeatedly to display “
<ONE
TIME BROAD>”.
4. Press {SET} to start programming the items
you want to transmit to.
5. Press {A} or {B} repeatedly to display the
desired item.
6. Press {SET}.
L
To program other items, repeat steps 5
and 6 (up to 20 items).
and 6 (up to 20 items).
7. Press {SET} to start transmission to the
programmed items.
To cancel broadcast transmission
1. Press {STOP} while the unit displays
“
BROADCASTING”.
L
L
The display will show “
SEND
CANCELLED?”.
2. Press {SET}.
FP141-145AL.book Page 29 Tuesday, October 21, 2003 11:07 AM