Ricoh 2400L Benutzerhandbuch

Use Polling Transmission when you wish to leave a document in the memory for
others to pick up.

You cannot specify the telephone number of the Message Receiver (the terminal
that you wish to poll your document), but using the ID Code there are ways to
make sure that the message does not go to the wrong place, as explained below.

There are three types of Polling Transmission.

Free Polling: 

Anybody can poll the message from the polled machine’s 
memory.

The message will only be sent out if the ID Code of the 
polling machine is the same as the ID Code stored in the 
polled machine.

Stored ID Override: 

There are two ways to use this feature:

❒

If your ID Code is different from that of the other 
terminal, you can use the other terminal’s ID Code just 
for this transmission (ask the other terminal’s operator 
what their ID Code is). Your machine’s stored ID Code 
will be ignored.

❒

For extra security, both parties can specify an ID Code
just for this communication. The ID Codes of both 
machines will be ignored. All communicating parties 
need to coordinate their ID Codes in this case.

Only one document can be stored in the memory for Free Polling, and only one
can be stored for Secured Polling. However, with Stored ID Override, you can
store more than one file, but you must use a different ID for each file.

Secured Polling and Stored ID Override can only be used between terminals
produced by the same manufacturer. 

Cross-reference
ID Code: see page 44.

Free Polling

1. Place your document in the feeder.

TRANSMIT        OPTIONk

DIAL FAX NUMBER

2. Function 1 5 and Yes.

          

See page 101 for the options that are

             available with Polling Transmission.

POLLING TRANS   OPTk

PUSH START

OTHER