Ricoh 2400L Benutzerhandbuch
Switch 09 - Various
Digit
Purpose
0, 1
Memory lock
Digit 1 Digit 0 Setting
(Feature Expander Required) X 0
Off*
Locked messages are printed 0 1
Only Lock messages from senders
when you enter the memory
whose RTI/CSI’s are programmed.
lock ID.
1 1
Lock all messages except those from
senders whose RTI/CSI’s are
programmed.
senders whose RTI/CSI’s are
programmed.
2 to 7
Do not change these settings.
Switch 10 Various
Digit
Purpose
0
Reverse order printing (Feature Expander Required) 0: Off*
1: On
1 to 6
Do not change these settings.
7
Halftone mode
0: Standard Mode*
1: Speed Mode
1: Speed Mode
Switch 11 Various
Digit
Purpose
0 to 5
Do not change these settings.
6
Printing the received message when acting as a forwarding station.
0: Off
1: On*
7
Polling standby duration
0: Once*
1: Keep
Switch 12 Various
Digit
Purpose
0 and 1
Do not change these settings.
2
Toner saving mode
0: Off*
1: On
Note:
If on, contrast will be set to "Normal" automatically, preserving image quality.
This is available when receiving fax messages and printing reports, but not for
copying or printing from a PC.
Further, messages sent to you in halftone mode will automatically turn off toner
saving to ensure a clear image.
To make sure that the fax quality is acceptable with toner saving on, print a few
reports (see page 117 ).
(Note: If the sender is using a machine made by another manufacturer, toner saving
will stay on and this could lower image quality.)
If on, contrast will be set to "Normal" automatically, preserving image quality.
This is available when receiving fax messages and printing reports, but not for
copying or printing from a PC.
Further, messages sent to you in halftone mode will automatically turn off toner
saving to ensure a clear image.
To make sure that the fax quality is acceptable with toner saving on, print a few
reports (see page 117 ).
(Note: If the sender is using a machine made by another manufacturer, toner saving
will stay on and this could lower image quality.)
3 and 4
Density of the printing image
Digit 4 Digit 3 Setting Digit 4 Digit 3 Setting
0 0
Digit 4 Digit 3 Setting Digit 4 Digit 3 Setting
0 0
Normal * 0
1 Lighten
1 0
Darken 1
1 Do not use
this setting.
this setting.
5 to 7
Do not change these settings.
Switch 13 - Do not use.
TECHNICAL
RE
FERE
NCE
TECHNICAL REFERENCE
ON/OFF SWITCHES AND USER PARAMETERS
161