Ricoh 2400L Benutzerhandbuch

8.  Repeat from step 5 for the second timer.

Press 

k

 to move the cursor under the

time.

TIMER#2 TUE        

∗

/#/Y

ON  FROM 12:00AM

  

Input on the time, 0 6 0 0, for example, on
the ten keypad.
To change AM to PM and the other 
way around, press  #. Accept the setting
by pressing Yes.

TIMER#2 TUE        

∗

/#/Y

ON  FROM 06:00PM

TO KEEP THE HEATER ON ALL DAY: Set both timers to ON = 12:00AM.
TO KEEP THE HEATER OFF ALL DAY: Set both timers to OFF = 12:00AM.

9. Either:

❐

Program the timer for another day: Go back to step 3.

❐

Finish: Yes and Function.

NOTE: To print the received messages while the heater is off, press any key. After all the
messages have been printed, the heater will stay on for 5 minutes before switching off again.
Because of this, the Night Timer does not give you complete security for received documents.
For this type of security, use the Memory Lock feature; see page 74.

During periods of the Night Timer cycle that the heating roller is off, it may be
switched on in these ways:

❐

When you hold the Energy Saver key down for a few seconds.

❐

When you insert a document in the feeder.

❐

When you pick up the handset, or press On Hook Dial key.

After you leave the machine alone for a while, the heating elements will turn back
off. Note that if Automatic Saver mode is disabled by a service technician, the
night timer will not turn back on.

OTHER