Ricoh 2000 Benutzerhandbuch
91
2. Send Settings
This section explains the features of [TX Mode], which you can use to apply vari-
ous transmission functions.
ous transmission functions.
Sending at a Specific Time (Send Later)
Using this function, you can instruct the machine to delay transmission of your
fax document until a specified later time. This allows you to take advantage of
off-peak telephone charges without having to be by the machine at the time.
fax document until a specified later time. This allows you to take advantage of
off-peak telephone charges without having to be by the machine at the time.
Important
❒ If the machine is switched off for about twelve hours, all fax documents
stored in memory are lost. If documents are lost for this reason, a Power Fail-
ure Report is automatically printed when the operation switch is turned on.
Use this report to identify lost documents. For details, see “Troubleshooting
When Using the Facsimile Function”, Troubleshooting.
ure Report is automatically printed when the operation switch is turned on.
Use this report to identify lost documents. For details, see “Troubleshooting
When Using the Facsimile Function”, Troubleshooting.
❒ This function is unavailable with Immediate Transmission. If you specify Im-
mediate Transmission for this function, the “
Dest. and functions that
could not be specified on immediate transmission is already se-
lected.
” message appears. When this happens, press [Exit], and then switch
to Memory Transmission.
A
Place the original, and then select the scan settings you require.
B
Press [TX Mode].
C
Select [Send Later] using {U} or {T}, and then press the {OK} key.