SMC Networks SMC8002CM-US Benutzerhandbuch

Quick Installation Guide

6

1.

Insert the square (B-type) USB plug 
of the USB cable into the USB port at 
the back of the modem and the 
rectangular (A-type) USB plug into 
the USB port at the back of the 
computer.

2.

The “Found New Hardware” screen 
will appear. Insert the driver disk. 
When prompted for the location of a 
driver, enter the drive letter of your 
floppy disk drive.

3.

Follow the instructions given to install the driver.

4.

Reboot your computer when prompted.

To connect the 

EZ Connect Cable Modem to a computer through the Ethernet port, the 

computer must have an Ethernet network adapter card installed, and be configured 
for TCP/IP protocol.

Carry out the following steps to check that the computer’s Ethernet port is correctly 
configured.

1.

Select Start/Settings/Control Panel.

2.

Click on the Network icon.

3.

For Windows NT, click the Protocols tab.

4.

Select TCP/IP from the list of network protocols, this may include details of 
adapters installed in your computer.

5.

Click on “Properties”.

6.

Select the option “Obtain an IP Address”.

1.

Select Start/Settings/Network and Dial-up Connections.

2.

Click on “Local Area Connections”.

3.

Select “TCP/IP” from the list of network protocols, this may include details of 
adapters installed in your computer.

4.

Click on “Properties”.

5.

Select the option “Obtain an IP Address”.

Your service provider will now be able to automatically assign an IP address to your 
computer.

USB Port

USB Cable

(provided)