Actiontec electronic 56K V.90 Benutzerhandbuch
20
Step 6
After the installation utility has finished installing the drivers, restart your
computer to enable the drivers.
computer to enable the drivers.
Step 7
Click on the Modems icon in the Control Panel. Verify that Windows NT
has correctly found the modem.
has correctly found the modem.
Step 8
If you wish to dial into a Windows NT Remote Access Server or wish to
connect to the Internet, you will need to configure Dial-up Networking. In
Control Panel double-click the Network icon. Click on the Services folder
and select Remote Access Service. If the Remote Access Service option is
not listed click on the Add button. Scroll-down the menu and select Re-
mote Access Service. Click the OK button. Windows NT may ask for its
CD-ROM for some files. Insert as required. After you have installed Re-
mote Access Service add the appropriate protocols as directed (e.g. TCP/IP
for Internet Access).
connect to the Internet, you will need to configure Dial-up Networking. In
Control Panel double-click the Network icon. Click on the Services folder
and select Remote Access Service. If the Remote Access Service option is
not listed click on the Add button. Scroll-down the menu and select Re-
mote Access Service. Click the OK button. Windows NT may ask for its
CD-ROM for some files. Insert as required. After you have installed Re-
mote Access Service add the appropriate protocols as directed (e.g. TCP/IP
for Internet Access).
Step 9
At the Remote Access Setup dialog box, click on Add. Select the RAS De-
vice you wish to add and Click OK.
vice you wish to add and Click OK.