Zoom MAC Benutzerhandbuch

8

Quick Start and Reference Guide

Your computer should be located near a telephone jack.

 CAUTION 

Before you start, touch a grounded metal surface other
than your computer to discharge static electricity. Static
electricity can damage computer and modem components.

Locate your faxmodem’s serial number on the bot-
tom of the case.  Write the number in the Impor-

tant Information section on page 32.

Turn off the computer.

Connect the faxmodem-to-computer cable. Plug one
end of the cable into the wide connector on the
back of the faxmodem. Plug the other end into the
serial port in the back of your computer.

Connect the telephone cord. Plug one end of the
cord into the PHONE LINE jack on the back of the
faxmodem. Plug the other end into the telephone
line connection (typically mounted on a wall), just
as you would a standard telephone.

Connect the power adapter. Plug one end of the
power adapter into the back of the faxmodem. Plug
the other end into an available electrical outlet. You
can leave the power adapter plugged in when you
are not using the faxmodem.

Connect telephone, as shown in the following dia-
gram. The faxmodem works with or without a tele-
phone connected to it. If your faxmodem came with
a speaker or earphone and microphone, plug them
into the jacks on the back of the faxmodem, as
shown in the illustration.