Netgear DGN100Bv3 Benutzerhandbuch

The fields that display on the Internet Setup screen depend on whether your Internet 
connection requires a login. 

If your Internet connection does require a login, the fields that display also depend on the 
selected encapsulation method and whether you select the T-Online, T&T, or Other radio 
button. The settings are described in the following sections. 

From WAN menu in the upper left of the screen, select the WAN interface, as directed by 
your ISP.

WAN1.

Interface WAN2 is used for regular Internet service. This is the default 

selection.

WAN2. Interface WAN2 is used for IPTV only. When you select WAN2, the No radio 
button is selected automatically, and the screen adjusts.

If you selected WAN1 from the WAN menu, select the Yes or No radio button.

Yes. Select the encapsulation method and enter the login name. If you want to 
change the login time-out, enter a new value in minutes.

No. Enter the account and domain names, only if needed.

Enter the settings for the IP address and DNS server. 

The default settings usually work fine. If you have problems with your connection, check 
the ISP settings.

Click the Apply button.

Your settings are saved.

To test your Internet connection, click the Test button.

.

The following sections describe all of the possible fields on the Internet Setup screen.

These fields display only when no login is required, that is, when you select No radio button.

Account Name (If required). Enter the account name provided by your ISP. This might 

also be called the host name.

Domain Name (If required). Enter the domain name provided by your ISP.

Internet IP Address.

Get Dynamically from ISP. Your ISP uses DHCP to assign your IP address. Your ISP 
automatically assigns these addresses.