Netgear DGN100Bv3 Benutzerhandbuch

You can use this screen to turn the wireless radio on and off, to configure advanced wireless 
settings, to specify WPS settings, to use AP mode, and to set up a wireless access list.

By default, the wireless radio is enabled so that you can connect wirelessly to the modem 
router. You can turn the wireless radio on or off on the Advanced Wireless Settings screen or 
by using the WiFi On/Off button on the modem router front panel. When the wireless radio is 
off, you can still use an Ethernet cable for a LAN connection to the modem router.



Select ADVANCED > Advanced Setup > Wireless Settings.

By default, the Enable Wireless Router Radio check box is selected.

(Optional) Clear the Enable Wireless Router Radio check box. 

Clearing this check box turns off the WiFi feature of the modem router. When the wireless 
radio is disabled, you can still use the modem router by connecting computers to the 
modem router with an Ethernet cable. By default, the wireless radio is enabled.

(Optional) Clear the Enable 20/40 MHz Coexistence check box.

By default, 20/40 MHz coexistence is enabled to prevent interference between wireless 
network in your environment at the expense of the wireless speed. If there are no other