Zoom X4 Benutzerhandbuch

10

X4 ADSL Modem User’s Manual

b

b

b

b 

Turn the unit on by pushing the ON/OFF toggle switch.

The PWR light on the unit’s front panel turns on.

cccc 

Plug one end of the supplied phone cord into the unit’s
ADSL jack and the other end into the ADSL wall jack.

d

d

d

d 

Plug one end of the USB cable into the modem’s USB

jack and plug the other end into your computer’s

corresponding USB port.

3

3

3

3 

The unit performs a startup sequence—the front panel LINK

light blinks. (For reference, we have included a table on page

41 that explains the meaning of the X4’s front panel lights.)
Note: You may see a Found New Hardware box

indicating the progression of the installation; typically no user
action is necessary. If you are using Windows XP, however,

you may be required to click Next.

4

4

4

4 

Depending on your operating system, you may see a
Hardware Installation disclaimer box or a Digital

Signature Not Found dialog box. You can safely ignore

these messages and click Yes or Continue Anyway.
Windows XP Users: If prompted to do so, click Finish.
When the startup sequence is complete, the LINK light will

change from blinking to solid. Continue below with
Establishing Communication with the X4.

1

1

1

1 

Depending on your computer’s operating system, you may
have a Zoom Web Console icon on your desktop.

•

 

If you do, double-click it to display the Network

Password dialog box.

•

 

If you do not have a Zoom Web Console icon, open your

Web browser, type http://10.0.0.2 and press Enter to

display the Network Password box.

Note: If your browser doesn’t open properly, it may be that

your settings need adjustment. See page 46 for instructions.