Zoom X4 Benutzerhandbuch

Appendix D: Macintosh and Linux Users: Configuring TCP/IP Settings

55

Note: If your computer won’t always be on a network with

working DNS at boot-time, set ONBOOT=no. If you

don’t, RedHat 6.2 (and possibly other versions) might

hang. To activate the card by hand when you have

attached your computer to the network, at root, run the
command: /sbin/ifup eth0.

For SuSE

For SuSE

For SuSE

For SuSE

Edit the file /etc/rc.config; search for the variables
NETCONFIG, NETDEV_0, and IFCONFIG_0.
Set them as follows (see the instructions in rc.config):

Reboot with this command: /sbin/shutdown -r now.
If you want to use a static IP address—for example, when setting
up a virtual server (page 22) or a DMZ (page 25)—consult the help

file or documentation that came with your operating system.

For Debian

For Debian

For Debian

For Debian

Add this line to the file /etc/network/interfaces: iface eth0 inet
dhcp. Reboot with this command: /sbin/shutdown -r now.
If you want to use a static IP address—for example, when setting
up a virtual server (page 22) or a DMZ (page 25)—consult the help
file or documentation that came with your operating system.