Zoom X6v VoIP Benutzerhandbuch

 

 

Enables or disables the blocking of 
outgoing calls from specific numbers in 
the Blocked Call List 

Disabled 

Specifies the list of outgoing numbers 

 

Availability of these features depends on whether they are supported by your VoIP service provider. 

Enables or disables call waiting for all 
calls. When the line is in use and a call is 
received, a call waiting tone is played. 
Pressing the flash or the hook button on 
the phone momentarily switches between 
the two calls. While there are calls on 
both lines, additional incoming calls 
receive busy signals. 

Enabled 

Enables or disables caller ID for inbound 
calls 

Enabled 

Enables or disables caller ID for outbound 
calls 

Enabled 

Enables or disables caller ID during call 
waiting 

Enabled 

Sets the amount of time after picking up 
the receiver before dial tone is generated.
(The range is 0 to 65535 in units of 10 
ms) 

50  
(that is, 500 ms) 

Specifies amount of time allowed for the 
user to dial a digit after picking up the 
telephone receiver. (The range is 0 to 
65535 in units of 10 ms) 

1500  
(15 s) 

Specifies the amount of time from when 
the receiver is picked up to the first dialed 
digit before Warm Line dialing occurs. 
(The range is 0 to 65535 in units of 10 
ms) 

400  
(4 s) 

 

 

46                                                                                                               X6v VoIP Features Technical Reference