Zoom X6v VoIP Benutzerhandbuch

 

Fully qualified domain name (FQDN) 
(including an optional port number) for the 
NTP/SNTP timeserver server 

time-a.nist.gov 

: When the date and time are set independently of NTP (that is, if a timeserver is unavailable or the 

use of a timeserver is disabled), adjustments must be made to a time at least one hour ahead or behind 
the currently displayed time, to prevent errors related to the internal workings of the time system. 

Manually configured VoIP subsystem 
startup delay. This parameter configures 
the VoIP subsystem to delay the indicated 
time before booting up. Normally there is 
no need to set it. If the VoIP subsystem 
has trouble registering at power up, you 
might set this delay to allow your X6v 
sufficient time to establish a DSL 
connection before the VoIP subsystem 
attempts to register. 

0 

Manually configured VoIP subsystem 
device name. 

ZOOM_VoIP 

Manually configured host device name (or 
name automatically assigned and saved). 

ZOOM_VoIP 

Manually configured domain name. 

 

Manually configured maximum transmit 
unit size (range of 576 to 1500). 

: the MTU setting is prepared for the 

use of PPPoE. Some system 
configurations require an MTU setting of 
1500. 

1492 

Manually configured IP address (or 
address automatically assigned and 
saved) 

192.168.0.234 

Manually configured local network mask 
(or netmask automatically assigned and 
saved) 

255.255.255.0 

Manually configured gateway IP address 
(or address automatically assigned and 
saved) 

192.168.0.1 

Manually configured IP address of 
primary domain name server (DNS) 

192.168.0.1 

Chapter 3:  System Parameters

                                                                                                                       

9