Zoom 1652A Benutzerhandbuch

Chapter 1: Installation Instructions 

23 

Once your initial computer has been successfully connected to the 
Web, you can now connect the other computers and/or a network 
device. 
•  To connect additional computers directly to the X5, see the 

next section. 

•  To connect a network device to the X5, see page 24. 

1 

Shut down the computer you want to add to the X5. (This is 
important because the computer must locate the correct IP 
address for the modem. This is done when the computer is 
turned back on in step 3 below.) 

2 

Plug one end of an Ethernet cable into one of the modem’s 
four ETHERNET ports and plug the other end into your 
computer’s Ethernet port. 

Note for Windows users: 
At this point, you should not be connecting any of your 
additional computers using the X5 modem’s USB port. If you 
planned to use the USB port, it should already be connected to 
the computer on which you ran the Installation Assistant, as 
explained above on page 7. 

3 

Turn on the computer. 

4 

Verify that your Internet connection is working. Open your 
Web browser and try to connect to a familiar Web address. 

5 

Repeat steps 1–4 for each computer you want to add. 

Congratulations! You have completed all you need to do to get 
your additional computers on the Internet. You are done with this 
user’s guide. Enjoy your X5!