Zoom 5654A Benutzerhandbuch

 43 

If you have changed the system settings on your X5 and for some 
reason want to restore them to the factory default settings, you can 
do so in one of two ways: You can perform a software reset or a 
hard reset. 

If you can open your Web browser and access your X5’s user 
interface, do the following to perform a software reset: 

1 

Log into the Zoom Configuration Manager and click the 
Advanced Setup icon to open the Advanced Setup page. 
(See page 13 if you need help logging in.) 

2 

In the Administration section, click the Reboot button. 

3 

From the Reboot Mode drop-down list, select Reboot From 
Default Configuration. 

4 

Click the Reboot button. Once this process is complete, your 
unit is reset to its factory settings. 

If you lose your link to the unit and cannot communicate with it 
via the Web browser, do the following to perform a hard reset: 

1 

Insert a paper clip into the RESET pinhole in the center of 
the modem’s back panel. 

2 

Hold it there for five seconds. The unit’s DSL light will turn 
off and then it will blink slowly, about once per second. 

You are now guaranteed that all system settings are restored to the 
X5’s factory defaults.