Multi Tech Equipment ISIHI-2S Benutzerhandbuch

Attention Code
The attention code precedes all command lines except A/ and the escape sequence.

RETURN RETURN Key
or ENTER Press the RETURN (ENTER) key to execute most commands.

Force Answer Mode
Answer call immediately without waiting for ring.

Repeat Last Command
Repeat the last command string. Do 

not precede this command with AT. Do not press RETURN

(or ENTER) to execute.

Answer Tone
n = 0, 1, 2, 3, 15, or 16
B0

Select ITU-T V.22 mode when modem is at 1200 bps

B1

Select Bell 212A when modem is at 1200 bps

B2

Deselect V.23 reverse channel

B3

Deselect V.23 reverse channel

B15

Select V.21 when the modem is at 300 bps

B16

Select Bell 103J when the modem is at 300 bps

V.32 Auto Retrain
n = 1
&B1

Enable V.32 auto retrain

View Numbers in Blacklist
If blacklisting is in effect, this command displays the numbers for which the last call attempted in
the previous two hours failed. In countries that do not require blacklisting, the ERROR result
code appears.

Carrier Control
n = 1
C1

Normal transmit carrier switching (included for backward compatibility with some software)

Carrier Detect Control
n = 0 or 1
&C0

Force Carrier Detect on

&C1

Let Carrier Detect follow carrier signal

Data Calling Tone
n = 0 or 1
-C0

Disable V.25 data calling tone

-C1

Enable V.25 data calling tone

Data Compression Control
n = 0 or 1
%C0 Disable V.42bis / MNP 5 data compression
%C1 Enable V.42bis / MNP 5 data compression

Dial
s = phone #
Dial telephone number 

s, where s may include up to 40 alpha-numeric characters, and the L, P,

T, V, W, comma (,), colon (:), semicolon (;), !, $, @ and ^ dial string modifiers