ZyXEL Communications ADSL2+4 Benutzerhandbuch
Chapter 15 Remote Management
P-660H-T1v3s User’s Guide
156
The following table describes the labels in this screen.
15.5 The SNMP Screen
SNMP is a popular management protocol defined by the Internet community for
TCP/IP networks. It is a communication protocol for collecting information from
devices on the network. Click Advanced > Remote MGMT > SNMP to set up
SNMP access for your P-660H-T1v3s.
TCP/IP networks. It is a communication protocol for collecting information from
devices on the network. Click Advanced > Remote MGMT > SNMP to set up
SNMP access for your P-660H-T1v3s.
Figure 65 Advanced > Remote MGMT > SNMP
Table 46 Advanced > Remote Management > FTP
LABEL
DESCRIPTION
Port
You may change the server port number for a service, if needed.
However, you must use the same port number in order to use that
service for remote management.
However, you must use the same port number in order to use that
service for remote management.
Access Status
Select the interface(s) through which a computer may access the P-
660H-T1v3s using this service.
660H-T1v3s using this service.
Secured Client
IP
IP
A secured client is a “trusted” computer that is allowed to communicate
with the P-660H-T1v3s using this service.
with the P-660H-T1v3s using this service.
Select All to allow any computer to access the P-660H-T1v3s using this
service.
service.
Choose Selected to just allow the computer with the IP address that
you specify to access the P-660H-T1v3s using this service.
you specify to access the P-660H-T1v3s using this service.
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.