ZyXEL Communications ADSL2+4 Benutzerhandbuch
Chapter 19 Tools
P-660H-T1v3s User’s Guide
187
to read about configurations that disallow
TFTP and FTP over WAN.
19.2 The Firmware Screen
Click Maintenance > Tools to open the Firmware screen. Follow the
instructions in this screen to upload firmware to your P-660H-T1v3s. The upload
process uses HTTP (Hypertext Transfer Protocol) and may take up to two minutes.
After a successful upload, the system will reboot. See
instructions in this screen to upload firmware to your P-660H-T1v3s. The upload
process uses HTTP (Hypertext Transfer Protocol) and may take up to two minutes.
After a successful upload, the system will reboot. See
for upgrading firmware using FTP/TFTP commands.
Do NOT turn off the P-660H-T1v3s while firmware upload is in
progress!
progress!
Figure 75 Maintenance > Tools > Firmware
The following table describes the labels in this screen.
Binary
Transfer the file in binary mode.
Abort
Stop transfer of the file.
Table 56 General Commands for GUI-based TFTP Clients (continued)
COMMAN
D
D
DESCRIPTION
Table 57 Maintenance > Tools > Firmware
LABEL
DESCRIPTION
Current
Firmware
Version
Firmware
Version
This is the present Firmware version and the date created.
File Path
Type in the location of the file you want to upload in this field or click
Browse ... to find it.
Browse ... to find it.