Olympus V406181UU000 Benutzeranleitung

Seite von 118
7
Troubleshooting 
101
EN
Problem
Possible cause
Solution
The display is blank.
The battery is not inserted 
properly.
Check that the positive and negative 
terminals of the battery are placed 
correctly (
☞  P.9).
The remaining battery power 
is low.
Replace or charge the battery (
☞ P.9, 
P.11).
The power is OFF.
Turn the power ON (
☞ P.9).
Unable to operate the 
voice recorder
The remaining battery power 
is low.
Replace or charge the battery (
☞ P.9, 
P.11).
The power is OFF.
Turn the power ON (
☞ P.9).
The voice recorder is in HOLD 
mode.
Release HOLD mode (
☞ P.19).
Unable to record
There is no remaining memory.
Erase unneeded files (
☞ P.46).
The maximum number of 
recordable files has been reached.
Select another folder (
☞ P.23, P.24).
WS-823 model only
[Speaker] has been selected for 
[Output] in the [FM Menu].
Select [Earphone] for [Output] (
☞ P.81).
Playback is inaudible.
The earphones are connected to 
the EAR jack. 
To output the playback through the built-
in speaker, disconnect the earphones. 
[Off] has been selected for 
[Speaker].
To output the playback through the 
built-in speaker, select [On] for [Speaker
(
☞ P.76).
The volume is set to [00].
Adjust the volume (
☞ P.34).
The recording is too 
quiet.
A low recording level has been 
set.
Redo recording after setting the recording 
level to [High] or [Middle] (
☞ P.63).
The output level of the connected 
external device may be too low.
Adjust the output level of the external 
device.
WS-823 model only
The recording level hasn’t been 
adjusted.
Redo recording after adjusting the 
recording level (
☞ P.63).
Troubleshooting