Olympus DM-450 Benutzerhandbuch

Seite von 128
14
1
EN
Power supply
 
2
  Insert battery, observing the 
correct = and - polarities.
Inserting batteries
This recorder can be used with either Ni-MH 
Rechargeable Batteries or AAA Alkaline 
Batteries.
 
1
  Slide the battery cover open 
while lightly pressing the battery 
cover release button.
•  When charging the recorder, be sure 
to use the supplied specified Ni-MH 
rechargeable (BR401) batteries.
•  The supplied rechargeable batteries 
are not fully charged. Before using 
the unit the first time or after long 
periods of disuse, it is recommended 
that you charge them until full ( 
P.15, P.16).
 
4
  Slide the POWER/HOLD switch in 
the direction indicated by the 
arrow, and turn the power on.
 
3
  Close the battery cover 
completely by pressing to the 
direction 
A, then sliding to the 
direction 
B.
•  If the “hour” indicator flashes in the 
display, see “Setting time and date 
[Time & Date]
” ( P.20).
Battery indicator
The battery indicator on the display changes 
as the batteries lose power.
•  When [] appears on the display, replace 
the batteries as soon as possible. When 
the batteries are too weak, [
] and 
[Battery Low] appears on the display, the 
recorder shuts down.
P
ow
e
r s
u
p
p
ly