Optimus 14-1121 Benutzerhandbuch
24
If you later decide to record on a tape side after you have re-
moved its erase-protection tab, place a piece of strong plastic
tape over that side’s erase-protection hole. Be sure you cover
only the hole originally covered by the erase-protection tab.
moved its erase-protection tab, place a piece of strong plastic
tape over that side’s erase-protection hole. Be sure you cover
only the hole originally covered by the erase-protection tab.
Caution: Removing the erase-protection tabs does not prevent
a bulk tape eraser from erasing a cassette tape.
a bulk tape eraser from erasing a cassette tape.
RESTORING TAPE TENSION AND
SOUND QUALITY
SOUND QUALITY
After you play a cassette tape several times, the tape might be-
come tightly wound on the reels. This can cause playback
sound quality to deteriorate.
come tightly wound on the reels. This can cause playback
sound quality to deteriorate.
To restore the sound quality, fast-forward the tape from the be-
ginning to the end of one side, then completely rewind it. Then
loosen the tape reels by gently tapping each side of the cas-
sette’s outer shell on a flat surface.
ginning to the end of one side, then completely rewind it. Then
loosen the tape reels by gently tapping each side of the cas-
sette’s outer shell on a flat surface.
Caution: Be careful not to damage the cassette when tapping
it. Do not touch the exposed tape or allow any sharp objects
near the cassette.
it. Do not touch the exposed tape or allow any sharp objects
near the cassette.
A
14-1121.fm Page 24 Thursday, July 1, 1999 2:42 PM