Royal Sovereign RSL-380 Benutzerhandbuch

6

- Located on the rear of 

the machine. “I” (on) “0” (off). (Fig. 1)

Cross Cutter (2) - Used to cut off the

laminated web. (Fig. 1)

Feed Guide (3) -The feed guide permits

alignment of the item(s) to be laminated. To

position the adjustable guide, loosen the knob, 

slide it to the desired position and tighten the 

knob to secure the feed guide in place. (Fig.2)

Safety Shield (4) - It prevents entanglement

The film shaft holds the film supply on the 

machine. The locking core holds and locks the 

film on the shaft to prevent shifting. (Fig.3)

Film Tension Adjustment (6) - Allows the 

operator to increase or decrease film web 

tension. To increase the tension turn the knob 

clockwise and to decrease tension turn the 

knob counterclockwise. (Fig. 4)

Figure 1

Reverse the rollers to undo jams

and correct misfed documents 

Run and stop the machine

Reduce roller speed 

(1~10 speed settings)

Increase roller speed 

(1~10 speed settings)

Laminate 25~38mic (1~1.5mil) film

Laminate 50~100mic (2~4mil) film

Laminate 125mic (5mil) film

Figure 2

Figure 3

Figure 4

7

25~38mic

(1~1.5mil)

50~100mic

(2~4mil)

125mic

(5mil)