SEAL 600-C Benutzerhandbuch

 

 

5

The following environmental conditions are ideal for 
the best operation of the laminator. 
 

The best temperature for the laminator is between 50°F 
and 86°F (16°C and 30°C). 
Do not expose the laminator to direct sunlight as output 
quality may be affected. 
 

For best results, the ambient relative humidity for the 

laminator should be between 70-90% non-condensing. 
Too much humidity will affect the prints being 

laminated causing problems with film adhesion. 
 

If the laminator is installed in a damp room or near 

water, the electrical power supply must be in accordance 
with the standards prevailing in the country concerned. 

Install the laminator in surroundings that are as clean 
and dust free as possible in order to obtain the highest 

quality output.  
The background dust level must not exceed that found 

in a typical office/computer room environment. 
The materials that are used on this laminator can have 

an electrostatic charge and will attract dust, adversely 
affecting the output.