Motorola MCPN750A Benutzerhandbuch
7-18
Computer Group Literature Center Web Site
Connector Pin Assignments
7
TMCPN710 Transition Module
The following tables summarize the pin assignments of connectors that are
specific to MCPN750A modules configured for use with TMCPN710
transition modules.
specific to MCPN750A modules configured for use with TMCPN710
transition modules.
TMCPN710 Transition Module CompactPCI Connectors
(J3/J4/J5)
(J3/J4/J5)
Connector J3 is a 95-pin 2mm hard metric type B connector which routes
I/O signals for PMC I/O and serial channels. The pinout for this connector
has been described previously in
I/O signals for PMC I/O and serial channels. The pinout for this connector
has been described previously in
.
Connector J4 is a 110-pin 2mm hard metric type A connector. This
connector is placed on the board for alignment only. The keying tabs on
the type A connector assist with alignment of pins in the backplane
connector during insertion of the boards. No signals are connected to J4
except the row F ground pins.
connector is placed on the board for alignment only. The keying tabs on
the type A connector assist with alignment of pins in the backplane
connector during insertion of the boards. No signals are connected to J4
except the row F ground pins.
Connector J5 is a 110-pin 2mm hard metric type B connector which routes
I/O signals for IDE, keyboard, mouse, USB and printer ports. The pinout
for this connector has been previously described in
I/O signals for IDE, keyboard, mouse, USB and printer ports. The pinout
for this connector has been previously described in
.