Motorola MCPN750A Benutzerhandbuch
TM-PIMC-0001 Transition Module
http://www.motorola.com/computer/literature
7-27
7
TM-PIMC-0001 Transition Module
The following tables summarize the pin assignments of connectors that are
specific to MCPN750A modules configured for use with the TM-PIMC-
0001 transition modules.
specific to MCPN750A modules configured for use with the TM-PIMC-
0001 transition modules.
TM-PIMC-0001 CompactPCI User I/O Connector (J3, J4, & J5)
Connector J3 is a 95-pin 2mm hard metric type B connector which routes
I/O signals for PMC I/O and serial channels. The pinout for this connector
has been described previously in
I/O signals for PMC I/O and serial channels. The pinout for this connector
has been described previously in
.
Connector J4 is a 110-pin 2mm hard metric type A connector. This
connector is placed on the board for alignment only. The keying tabs on
the type A connector assist with alignment of pins in the backplane
connector during insertion of the boards. No signals are connected to J4
except the row F ground pins.
connector is placed on the board for alignment only. The keying tabs on
the type A connector assist with alignment of pins in the backplane
connector during insertion of the boards. No signals are connected to J4
except the row F ground pins.
Connector J5 is a 110-pin 2mm hard metric type B connector which routes
I/O signals for IDE, keyboard, mouse, USB and printer ports. The pinout
for this connector has been previously described in
I/O signals for IDE, keyboard, mouse, USB and printer ports. The pinout
for this connector has been previously described in
.