Motorola MCPN750A Benutzerhandbuch
xviii
Summary of Changes
The following is a list of changes made since the last release of this
manual.
manual.
Overview of Contents
This section provides a brief overview of each chapter and appendix within
this document.
this document.
, provides a brief
product description and a block diagram. The remainder of the chapter
provides information on hardware preparation and installation
instructions, including peripheral boards such as the TMCPN710 or TM-
PIMC-0001 Transition Module.
provides information on hardware preparation and installation
instructions, including peripheral boards such as the TMCPN710 or TM-
PIMC-0001 Transition Module.
, provides an overview of basic operating
and configuring issues such as the PPCBug firmware, the memory maps,
interrupts, arbitration, sources of reset and endian issues.
interrupts, arbitration, sources of reset and endian issues.
, provides an overview and description of basic
PPCBug use including implementation issues, a list of the initialization
sequence, a description of basic debugger commands, as well as a list of
diagnostic tests typically run.
sequence, a description of basic debugger commands, as well as a list of
diagnostic tests typically run.
Date
Changes
Replaces
09/01
Updated table of model numbers
preceeding this section.
preceeding this section.
Reinserted information left out of IH4
version of manual, which included
information on MCPN750A, the
TMCPN710 and the TM-PIMC-0001,
instead of the earlier MCPN750. Also,
included J8 jumper settings for Stand-
Alone operation.
version of manual, which included
information on MCPN750A, the
TMCPN710 and the TM-PIMC-0001,
instead of the earlier MCPN750. Also,
included J8 jumper settings for Stand-
Alone operation.
Previously listed model numbers.
07/00
68-pin .08 Series Subminature D PMC I/O
Connector.
Connector.
68-pin .050 Series Subminature
D PMC I/O Connector.
D PMC I/O Connector.