Motorola MT2070 Benutzerhandbuch

Scanning

3 - 3

In addition to beep sequences, the device uses a two-color LED to indicate status. 

 defines LED colors 

that display during scanning.

Off

No power is applied to the device, or the device is on and ready to scan.

Green

A bar code was successfully decoded.

Red

Transmission error, conversion or format error, device malfunction or RS-232 receive 
error.

Off

No power is applied to the device.

Momentarily Off

A bar code was successfully decoded.

Green

The device is on and ready to scan.

Red

Transmission error, conversion or format error, or RS-232 receive error.

Green

Number expected. Enter value using numeric bar codes.

Successful program exit with change in parameter setting.

Red

Input error: incorrect bar code, programming sequence, or Cancel scanned.

Green

Enter another digit. Add leading zeros to the front if necessary.

Enter another alphabetic character or scan the End of Message bar code.

All criteria or actions cleared for current rule, continue entering rule.

Delete last saved rule. The current rule is left intact.

All rules deleted.

Blinking Green

Enter another criterion or action, or scan the Save Rule bar code.

Green after Blinking

Rule saved. Rule entry mode exited.

Cancel rule entry. Rule entry mode exited because of an error or the user asked to exit 
rule entry.

Red

Out of rule memory. Erase some existing rules, then try to save rule again. 

Entry error, wrong bar code scanned, or criteria/action list is too long for a rule. Re-enter 
criterion or action.