Motorola MT2070 Benutzerhandbuch
4 - 4
MT2070/MT2090 User Guide
Radio Communications Host Types
To set up the device for communication with a cradle, or to use standard Bluetooth profiles, scan the appropriate
host type bar code below.
host type bar code below.
•
Cradle Host (default) - Select this host type for device(s) to cradle operation. The device must then be paired
to the cradle and the cradle communicates directly to the host via the host interface cable connection.
to the cradle and the cradle communicates directly to the host via the host interface cable connection.
•
Serial Port Profile (Master) - Select this host type for Bluetooth Technology Profile Support (see
).
The device connects to the PC/host via Bluetooth and behaves like there’s a serial connection. The device
initiates the connection to the remote device and is the Master. Scan Serial Port Profile (Master), then scan
the PAIR bar code for the remote device. See
initiates the connection to the remote device and is the Master. Scan Serial Port Profile (Master), then scan
the PAIR bar code for the remote device. See
for information about
creating a pairing bar code for a remote device.
•
). The
device connects to the PC/host via Bluetooth and behaves like there’s a serial connection. The device
accepts incoming connection requested from a remote device and is the Slave. Scan Serial Port Profile
(Slave) and wait for the incoming connection.
accepts incoming connection requested from a remote device and is the Slave. Scan Serial Port Profile
(Slave) and wait for the incoming connection.
•
Bluetooth Keyboard Emulation (HID Slave) - Select this host type for Bluetooth Technology Profile Support.
(See
(See
for Bluetooth Technology Profile Support and Master/Slave definitions.) The device connects
to the PC/host via Bluetooth and behaves like a keyboard. The device accepts incoming connection
requested from a remote device and is the slave. Scan Bluetooth Keyboard Emulation (HID Slave) and
wait for the incoming connection.
requested from a remote device and is the slave. Scan Bluetooth Keyboard Emulation (HID Slave) and
wait for the incoming connection.
NOTE
1.The device supports keyboard emulation over the Bluetooth HID profile. For detailed information, and
HID host parameters, see
HID host parameters, see
.
2. When the device is paired to the cradle in SPP Master or Cradle Host mode, the device automatically
tries to reconnect to a remote device when a disconnection occurs that is due to the radio losing
communication. For more information see
tries to reconnect to a remote device when a disconnection occurs that is due to the radio losing
communication. For more information see
.