Motorola MT2070 Benutzerhandbuch
Imaging Preferences
6 - 9
Image Brightness (Target White)
Parameter # F0h 86h
Type: Byte
Range: 1 - 240
This parameter sets the Target White value used in Snapshot, Video and Video Viewfinder mode when using auto
exposure. White and black are defined as 255 decimal and 0, respectively. Setting the value to the factory default
of 180 sets the white level of the image to ~180.
exposure. White and black are defined as 255 decimal and 0, respectively. Setting the value to the factory default
of 180 sets the white level of the image to ~180.
To set the Image Brightness parameter, scan Image Brightness below followed by three numeric bar codes
representing the value. Leading zeros are required. For example, to set an Image Brightness value of 99, scan 0,
9, 9. See
representing the value. Leading zeros are required. For example, to set an Image Brightness value of 99, scan 0,
9, 9. See
for numeric bar codes.
JPEG Quality and Size Value
JPEG Quality = Parameter # F0h, 31h
If you selected JPEG Quality Selector, scan the JPEG Quality Value bar code followed by 3 bar codes from
corresponding to a value from 5 to 100, where 100 represents the highest quality
image.
*
180
Image Brightness
(3 digits)
JPEG Quality Value
(Default: 065)
(5 - 100 Decimal)