Motorola MT2070 Benutzerhandbuch
Accessories 13 - 5
LED Indicators
Miscellaneous LED Indicator Information
•
Single slot charge only cradle (STB2000)
•
Blue LED is off when there is a USB connection but no external power supply is used.
•
Single slot multi-interface Bluetooth cradle (STB2078)
•
Blue LED lights when there is a USB or keyboard wedge connection but no external power supply is used.
Table 13-2
LED Charging Status Indicators - Single Slot Charge Only Cradles
LED
Indication
LED on Device
Off
No power applied to device (battery discharged or removed); device is in low power and
ready to scan; or, battery is fully charged and device is ready to scan.
ready to scan; or, battery is fully charged and device is ready to scan.
Note: The default state of the LED is off when the battery is fully charged. By modifying the
BatteryLED.reg file under the \Platform directory on the device, you have the option to
enable a solid green LED on a fullly charged battery. For detailed information, refer to the
MT2070/MT2090 Integrator Guide, p/n 72E-117858-xx.
BatteryLED.reg file under the \Platform directory on the device, you have the option to
enable a solid green LED on a fullly charged battery. For detailed information, refer to the
MT2070/MT2090 Integrator Guide, p/n 72E-117858-xx.
Green Flash
Device is charging (when cradle is powered from external power supply).
Red Flash
Charging problem or data transmission problem.
LED on Cradle
Off
Cradle is not powered or power fault on contacts.
Solid Blue
Cradle is powered.
Table 13-3
LED Charging Status Indicators - Single Slot Multi-interface Cradles
LED
Indication
LED on Device
Off
No power applied to device (battery discharged or removed); device is in low power and
ready to scan; or, battery is fully charged and device is ready to scan.
ready to scan; or, battery is fully charged and device is ready to scan.
Note: The default state of the LED is off when the battery is fully charged. By modifying the
BatteryLED.reg file under the \Platform directory on the device, you have the option to
enable a solid green LED on a fully charged battery. For detailed information, refer to the
MT2070/MT2090 Integrator Guide, p/n 72E-117858-xx.
BatteryLED.reg file under the \Platform directory on the device, you have the option to
enable a solid green LED on a fully charged battery. For detailed information, refer to the
MT2070/MT2090 Integrator Guide, p/n 72E-117858-xx.
Green Flash
Device is charging (when cradle is powered from external power supply).
Red Flash
Charging problem or data transmission problem.
LED on Cradle
Off
Cradle is not powered.
Solid Blue
Cradle is powered.
Red/Blue/Purple
Power up sequence.
Rapid Red/Blue/Red/Blue
Power fault on all contacts.