Motorola CPCI-6020 Benutzerhandbuch
![Motorola](https://files.manualsbrain.com/attachments/83de88ba2280e7232128e8931d7cbd2a38dcc654/common/fit/150/50/0293f422c4d32e7e0f777d5e11bc33c83ea5627f71ddf155374c02a23d9a/brand_logo.png)
CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C)
Transition Module Preparation and Installation
10BaseT/100BaseTx Connectors
146
7.9.3
10BaseT/100BaseTx Connectors
Two 10BaseT/100BaseTx RJ-45 connectors are located on the rear panel of the CPCI-6020-
MCPTM-01 to support Ethernet I/O from the CPCI-6020. One channel is always routed from
the CPCI-6020, the other is a custom-build option. Enabling this option requires that the proper
zero ohm resistors be installed on the CPCI-6020. The pin assignments for these connectors
are as follows:
MCPTM-01 to support Ethernet I/O from the CPCI-6020. One channel is always routed from
the CPCI-6020, the other is a custom-build option. Enabling this option requires that the proper
zero ohm resistors be installed on the CPCI-6020. The pin assignments for these connectors
are as follows:
7.9.4
COM1 Connector
An RJ-45 connector is located on the panel of the CPCI-6020-MCPTM-01 to provide the
interface to the COM1 serial port. This port is configured as DCE. The pin assignments for this
connector are as follows:
interface to the COM1 serial port. This port is configured as DCE. The pin assignments for this
connector are as follows:
Table 7-6 10BaseT/100BaseTx Connector Pin Assignments
Pin
Signal
1
TD+
2
TD-
3
RD+
4
AC Terminated
5
AC Terminated
6
RD-
7
AC Terminated
8
AC Terminated
Table 7-7 COM1 Connector Pin Assignments
Pin
Signal
1
DCD
2
RTS
3
GND
4
TXD
5
RXD
6
GND
7
CTS
8
DTR