Motorola CPCI-6020 Benutzerhandbuch
CPCI-6020 CompactPCI Single Board Computer Installation and Use (6806800A51C)
Hardware Preparation and Installation
CPCI-6020 Baseboard Preparation
40
The CPCI-6020 also provides configuration modification via software control by setting bits in
control registers after installing the module in a system. The CPCI-6020 control registers are
described in the CPCI-6020 CompactPCI Single Board Computer Programmer’s Reference
Guide, and the Harrier Application Specific Integrated Circuit (ASIC) Programmer’s Reference
Guide.
control registers after installing the module in a system. The CPCI-6020 control registers are
described in the CPCI-6020 CompactPCI Single Board Computer Programmer’s Reference
Guide, and the Harrier Application Specific Integrated Circuit (ASIC) Programmer’s Reference
Guide.
2.7
CPCI-6020 Baseboard Preparation
Prior to installing any memory, flash, or PMC modules on the CPCI-6020 baseboard, ensure
that all jumpers that are user configurable are set properly. To do this, refer to
that all jumpers that are user configurable are set properly. To do this, refer to
or the
board itself for the location of specific jumpers. Set the jumpers according to the following
descriptions. Manually configured items on the baseboard include:
descriptions. Manually configured items on the baseboard include:
z
Flash bank selection (J24)
z
Harrier Power up configuration header (J22)
z
PMC 66 MHz optional setting (J21)
z
Enable/disable +12 V and -12 V use on the CPCI-6020 (J18)
z
Enable/disable lockdown of one or more flash blocks of Bank A (J17)
z
Enable/disable write-protect for all of flash Bank A (J20)